Belkin F1DP108AEA User Guide
28
28
Installation
Powering Up the Systems
Verify that all servers connected to the SMB CAT5 KVM Switch are powered on.
If any connected servers have not been powered on, it is okay to do so at this
time (servers can be powered on simultaneously). The SMB CAT5 KVM Switch
emulates both a mouse and keyboard on each port and allows your server to
boot normally.
The server connected to Port “1” will be displayed on the monitor. Check that the
keyboard, monitor, and mouse are working normally. Check all occupied ports to
verify that all servers are connected and responding correctly. If you encounter
an error, check your cable connections for that server and reboot. If the problem
persists, please refer to the “Troubleshooting” section in this User Manual.
If any connected servers have not been powered on, it is okay to do so at this
time (servers can be powered on simultaneously). The SMB CAT5 KVM Switch
emulates both a mouse and keyboard on each port and allows your server to
boot normally.
The server connected to Port “1” will be displayed on the monitor. Check that the
keyboard, monitor, and mouse are working normally. Check all occupied ports to
verify that all servers are connected and responding correctly. If you encounter
an error, check your cable connections for that server and reboot. If the problem
persists, please refer to the “Troubleshooting” section in this User Manual.