Billion Electric Company BiGuard 10 User Manual
110
(subnet). The routing table stores the routing information so the router knows
where to redirect the IP packets.
where to redirect the IP packets.
Click on Static Route and then click Create to add a routing table.
Rule: Select Enable to activate this rule, Disable to deactivate this rule.
Destination: This is the destination subnet IP address.
Netmask: This is the subnet mask of the destination IP addresses based on above
destination subnet IP.
Gateway: This is the gateway IP address to which packets are to be forwarded.
Interface: Select the interface through which packets are to be forwarded.
Cost: This is the same meaning as Hop.