Billion Electric Company BiGuard 10 User Manual

 

 

25

Be sure to also review the Safety Warnings located in the preface of this manual 
before working with your BiGuard 2/10. 
 

3.3  Connecting Your Router 
 

Connecting BiGuard 2/10 is an easy three-step process: 
 
1. Connect BiGuard 2/10 to your LAN by connecting Ethernet cables from your 
networked PCs to the LAN ports on the router. Connect BiGuard 2/10 to your 
broadband Internet connection via router’s WAN port. 

 

 

 
2. Plug BiGuard 2/10 to an AC outlet with the included AC Power Adapter. 

 

 

 
3. Ensure that the Power and WAN LEDs are solidly lit, and that on any LAN port that 
has an Ethernet cable plugged in the LED is also solidly lit. The Status LED will 
remain solid as the device boots. Once the boot sequence is complete, the LED will 
shut off, indicating that BiGuard 2/10 is ready. 

 

 

 

If the router does not power on, please refer to Chapter 5: Troubleshooting for 
possible solutions.