Billion Electric Company BiGuard 10 User Manual

 

 

72

 

 
Username: Enter your user name. 
Password: Enter your password. 
Retype Password: Retype your password. 
Connection: Select whether the connection should Always Connect or Trigger on 
Demand. If you want the router to establish a PPPoE session when starting up and 
to automatically re-establish the PPPoE session when disconnected by the ISP, 
select Always Connect. If you want to establish a PPPoE session only when there 
is a packet requesting access to the Internet (i.e. when a program on your computer 
attempts to access the Internet), select Trigger on Demand. 
Idle Time: Auto-disconnect the router when there is no activity on the line for a 
predetermined period of time. Select the idle time from the drop down menu. Active 
if Trigger on Demand is selected. 
IP Assigned by your ISP: If your IP is dynamically assigned by your ISP, select the 
Dynamic radio button. If your IP assigns a static IP address, select the Static radio 
button, and input your IP address in the blank provided. 
MAC Address: If your ISP requires you to input a WAN Ethernet MAC, check the 
checkbox and enter your MAC address in the blanks below. 
Candidates: You can also select the MAC address from the list in the Candidates. 
DNS: If your ISP requires you to manually setup DNS settings, check the checkbox 
and enter your primary and secondary DNS. 
RIP: To activate RIP, select Send, Receive, or Both from the drop down menu. To 
disable RIP, select Disable from the drop down menu.