Billion Electric Company BiGuard 2 User Manual
12
Link/ACT: Lit when device is connected.
Blinking when data is transmitting/receiving.
LAN
1 – 8
Lit when connected to an Ethernet device.
10/100M : Lit green when connected at 100Mbps.
Not lit when connected at 10Mbps.
Link/ACT: Lit when device is connected.
Blinking when data is transmitting/receiving.
1.3.1.2 Rear Panel
Port
Meaning
1 RESET
After the device is powered on, press it to reset the device or restore to factory
default settings.
0-3 seconds: The Status LED will light
6 seconds above: restore to factory default settings (this is used when you
cannot login to the router. E.g. forgot the password)
default settings.
0-3 seconds: The Status LED will light
6 seconds above: restore to factory default settings (this is used when you
cannot login to the router. E.g. forgot the password)
2
LAN
1X — 8X
(RJ-45 connector)
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the eight LAN ports
when connecting to a PC or an office/home network of 10Mbps or 100Mbps.
when connecting to a PC or an office/home network of 10Mbps or 100Mbps.
3
WAN
WAN 10/100M Ethernet port (with auto crossover support); connect
xDSL/Cable modem here.
xDSL/Cable modem here.
4
DC12V
Connect DC power adapter here.(DC12V Power)
4
3
2
1