Barco 26-0507000-00 User Manual
28
BlendPRO-II • User’s Guide
3. Installation
Format Connection Table
cçêã~í=`çååÉÅíáçå=q~ÄäÉ
Use the following table to connect BlendPRO-II’s analog RGB output to various analog
projector inputs (3 wire, 4 wire and 5 wire). Using a customer supplied VGA to 5 x BNC
breakout cable, multiple combinations are possible. Cells with checks denote the
connections required for the indicated format.
projector inputs (3 wire, 4 wire and 5 wire). Using a customer supplied VGA to 5 x BNC
breakout cable, multiple combinations are possible. Cells with checks denote the
connections required for the indicated format.
Please contact Barco Technical Support for information on obtaining breakout cables. In
Appendix B, refer to the “
Appendix B, refer to the “
” section on page 42 for details.
Note
For RGB with H and V sync, use the VGA connector directly.
Table 3-2. Analog Output Combinations using Breakout Cable
Breakout Cable
Wire Color
RGB
Sync on Green
RGB
Comp Sync
RGB
Separate H V
R
3
3
3
G
3
3
3
B
3
3
3
H Sync
3
3
V Sync
3