ZyXEL Communications XGS-4526 User Manual

Chapter 12 Filtering

XGS-4526/4528F/4728F User’s Guide

Action

Select Discard source to drop frames from the source MAC address 
(specified in the MAC field). The Switch can still send frames to the MAC 
address.

Select Discard destination to drop frames to the destination MAC address 
(specified in the MAC address). The Switch can still receive frames 
originating from the MAC address.

Select Discard source and Discard destination to block traffic to/from 
the MAC address specified in the MAC field.

MAC

Type a MAC address in a valid MAC address format, that is, six hexadecimal 
character pairs.

VID

Type the VLAN group identification number.

Add

Click Add to save your changes to the Switch’s run-time memory. The 
Switch loses these changes if it is turned off or loses power, so use the Save 
link on the top navigation panel to save your changes to the non-volatile 
memory when you are done configuring.

Cancel

Click Cancel to begin configuring this screen afresh.

Clear

Click Clear to clear the fields to the factory defaults.

Index

This field displays the index number of the rule. Click an index number to 
change the settings. 

Active

This field displays Yes when the rule is activated and No when is it 
deactivated.

Name

This field displays the descriptive name for this rule. This is for identification 
purposes only.

MAC 
Address 

This field displays the source/destination MAC address with the VLAN 
identification number to which the MAC address belongs. 

VID

This field displays the VLAN group identification number.

Delete

Check the rule(s) that you want to remove in the Delete column and then 
click the Delete button.

Cancel

Click Cancel to clear the selected checkbox(es) in the Delete column.

Table 25   Advanced Application > FIltering  (continued)