ZyXEL Communications XGS-4526 User Manual

Page of 491
 Chapter 37 OSPF
XGS-4526/4528F/4728F User’s Guide
335
The following table describes some common output fields.
Link State 
Database 
The text box displays information in the link state database which contains 
data in the LSAs. 
Poll 
Interval(s) 
The text box displays how often (in seconds) this screen refreshes. You 
may change the refresh interval by typing a new number in the text box 
and then clicking Set Interval.
Stop
Click Stop to end OSPF status polling.
Table 116   OSPF Status: Common Output Fields 
FIELD
DESCRIPTION
Interface
Internet 
Address
This field displays the IP address and subnet bits of an IP routing 
domain. 
Area
This field displays the area ID. 
Router ID
This field displays the unique ID of the Switch. 
Transmit Delay This field displays the transmission delay in seconds.  
State
This field displays the state of the Switch (backup or DR (designated 
router)). 
Priority
This field displays the priority of the Switch. This number is used in the 
designated router election. 
Designated 
Router
This field displays the router ID of the designated router. 
Backup 
Designated 
Router
This field displays the router ID of a backup designated router.
Time Intervals 
Configured
This field displays the time intervals (in seconds) configured. 
Neighbor Count This field displays the number of neighbor routers. 
Adjacent 
Neighbor Count
This field displays the number of neighbor router(s) that is adjacent to 
the Switch. 
Neighbor
Neighbor ID
This field displays the router ID of the neighbor.
Pri
This field displays the priority of the neighbor. This number is used in the 
designated router election.
State
This field displays the state of the neighbor (backup or DR (designated 
router)).
Dead Time
This field displays the dead time in seconds. 
Address
This field displays the IP address of a neighbor. 
Interface
This field displays the MAC address of a device. 
Link State Database
Link ID
This field displays the ID of a router or subnet.  
ADV Router
This field displays the IP address of the layer-3 device that sends the 
LSAs. 
Table 115   IP Application > OSPF Status  (continued)
LABEL
DESCRIPTION