ZyXEL Communications XGS-4526 User Manual

 Chapter 41 DHCP

XGS-4526/4528F/4728F User’s Guide

Use this screen to configure your DHCP settings based on the VLAN domain of the 
DHCP clients. Click IP Application > DHCP in the navigation panel, then click the 
VLAN link In the DHCP Status screen that displays. 

Note: You must set up a management IP address for each VLAN that you want to 

configure DHCP settings for on the Switch. See 

information on how to do this.

Figure 190   IP Application > DHCP > VLAN   

The following table describes the labels in this screen. 

Table 134   IP Application > DHCP > VLAN 

VID

Enter the ID number of the VLAN to which these DHCP settings apply. 

DHCP Status

Select whether the Switch should function as a DHCP Server or Relay for 
the specified VID. If you select Server then fields related to DHCP relay 
configuration are grayed out and vice versa.