ZyXEL Communications XGS-4526 User Manual

 Chapter 46 Access Control

XGS-4526/4528F/4728F User’s Guide

From the Access Control screen, display the SNMP screen. You can click Access 
Control to go back to the Access Control screen. 

Figure 218   Management > Access Control > SNMP 

The following table describes the labels in this screen. 

rmon

RmonRisingAlarm

1.3.6.1.4.1.890.1.5.1.1.16
.0.1

This trap is sent when a variable 
goes over the RMON "rising" 
threshold.

RmonFallingAlarm

1.3.6.1.4.1.890.1.5.1.1.16
.0.2

This trap is sent when the 
variable falls below the RMON 
"falling" threshold.

cfm

dot1agCfmFaultAlarm

1.3.111.2.802.1.1.8.0.1

The trap is sent when the 
Switch detects a connectivity 
fault. 

Table 150   SNMP Switch Traps  (continued)

Table 151   Management > Access Control > SNMP 

General Setting Use this section to specify the SNMP version and community (password) 

values.

Version

Select the SNMP version for the Switch. The SNMP version on the Switch 
must match the version on the SNMP manager. Choose SNMP version 2c 
(v2c), SNMP version 3 (v3) or both (v3v2c). 

Note: SNMP version 2c is backwards compatible with SNMP 

version 1.