ZyXEL Communications XGS-4526 User Manual
Chapter 6 Tutorials
XGS-4526/4528F/4728F User’s Guide
81
6.5.1 Creating a Guest VLAN
Follow the steps below to configure port 1, 2, 3 and 10 as a member of VLAN 200.
1
Access the web configurator through the Switch’s management port.
2
Go to Basic Setting > Switch Setup and set the VLAN type to 802.1Q. Click
Apply to save the settings to the run-time memory.
Apply to save the settings to the run-time memory.
3
Click Advanced Application > VLAN > Static VLAN.
4
In the Static VLAN screen, select ACTIVE, enter a descriptive name (VLAN 200
for example) in the Name field and enter 200 in the VLAN Group ID field.
for example) in the Name field and enter 200 in the VLAN Group ID field.
5
Select Fixed to configure ports 1, 2, 3 and 10 to be permanent members of this
VLAN.
VLAN.
6
Clear the TX Tagging check box to set the Switch to remove VLAN tags before
sending frames out of these ports.
sending frames out of these ports.