ZyXEL Communications ES-2108 User Manual
ES-2108 Series User’s Guide
Chapter 29 IEEE 802.1Q Tagged VLAN Commands
189
Figure 130 CPU VLAN Configuration and Activation Example
29.4 Global VLAN1Q Tagged VLAN Configuration Commands
This section shows you how to configure and monitor the IEEE 802.1Q Tagged VLAN.
29.4.1 GARP Status
Syntax:
show garp
This command shows the switch’s GARP timer settings, including the join, leave and leave all
timers.
timers.
An example is shown next.
Figure 131 GARP STATUS Command Example
29.4.2 GARP Timer
Syntax:
garp join <msec> leave <msec> leaveall <msec>
where
ras (config)# vlan 3
ras (config-vlan)# inactive
ras (config-vlan)# inactive
ras # show garp
GARP Timer
------------------------
Join Timer = 200
Leave Timer = 600
Leave All Timer = 10000
ras#
GARP Timer
------------------------
Join Timer = 200
Leave Timer = 600
Leave All Timer = 10000
ras#
join <msec>
= This sets the duration of the Join Period timer for GVRP in
milliseconds. Each port has a Join Period timer. The allowed Join Time
range is between 100 and 32767 milliseconds; the default is 200
milliseconds.
range is between 100 and 32767 milliseconds; the default is 200
milliseconds.