ZyXEL Communications ES-2108 User Manual
ES-2108 Series User’s Guide
Chapter 5 Initial Setup Example
51
C
H A P T E R
5
Initial Setup Example
This chapter shows how to set up the switch for an example network.
5.1 Overview
The following lists the configuration steps for the initial setup:
• Create a VLAN
• Set port VLAN ID
• Configure the switch IP management address
• Set port VLAN ID
• Configure the switch IP management address
5.1.1 Creating a VLAN
VLANs confine broadcast frames to the VLAN group in which the port(s) belongs. You can
do this with port-based VLAN or tagged static VLAN with fixed port members.
do this with port-based VLAN or tagged static VLAN with fixed port members.
In this example, you want to configure port 5 as a member of VLAN 2.
Figure 22 Initial Setup Network Example: VLAN