ZyXEL Communications ES-2108 User Manual
ES-2108 Series User’s Guide
Chapter 6 System Status and Port Statistics
57
Figure 26 Status: Port Details (ES-2108PWR)
The following table describes the labels in this screen.
Table 7 Status: Port Details
LABEL
DESCRIPTION
Port Info
Link
This field shows whether the Ethernet connection is down, and the speed/duplex
mode.
Status
This field shows the training state of the ports. The states are FORWARDING
(forwarding), which means the link is functioning normally or STOP (the port is stopped
to break a loop or duplicate path).
PD Max
Current (mA)
This field is only available on the ES-2108PWR but not available for the Gigabit and
mini-GBIC ports.
This field shows the maximum current a powered device can get from the switch. If the
This field shows the maximum current a powered device can get from the switch. If the
powered device’s power consumption exceeds the maximum power offered by the
switch, the switch stops sending power.
The switch can provide up to 351.36mA current to one PD connected to each 10/
The switch can provide up to 351.36mA current to one PD connected to each 10/
100Mbps Ethernet port and up to a total of 123.2W power to all PDs connected to the
switch.