Lucent Technologies 1100 User Manual
Troubleshooting
Issue 1 June 1998
4-3
If you must contact Lucent Technologies on behalf of the remote
user, be sure to obtain the serial number found on the Remote
Module.
user, be sure to obtain the serial number found on the Remote
Module.
LED Sequences
The LEDs on the Switch Module help to indicate problems that
occur.
occur.
During the power-up sequence, the DEFINITY Extender 1100
System performs a self-test, indicated by a sequence of 1 yellow,
and 8 red flashes, followed by 1 green flash, fast blinking red
flashes for about 6 seconds, 3 green flashes and 1 red flash. That
series of flashes is followed by 3 sets of 8 yellow flashes.
System performs a self-test, indicated by a sequence of 1 yellow,
and 8 red flashes, followed by 1 green flash, fast blinking red
flashes for about 6 seconds, 3 green flashes and 1 red flash. That
series of flashes is followed by 3 sets of 8 yellow flashes.
If your Switch Module power up LED sequence repeats itself, the
last sequence displayed represents the test failure that occurred.
See Table 4-1 for failure description. Power down the unit, and
retry. If error persists, contact the Lucent Technologies Helpline.
last sequence displayed represents the test failure that occurred.
See Table 4-1 for failure description. Power down the unit, and
retry. If error persists, contact the Lucent Technologies Helpline.