ZyXEL Communications 4728F User Manual

 Chapter 24 Multicast

XGS-4526/4528F/4728F User’s Guide

All source ports and receiver ports belonging to a multicast group can receive 
multicast data sent to this multicast group.

Configure MVR IP multicast group address(es) in the Group Configuration 
screen. Click Group Configuration in the MVR screen.

Note: A port can belong to more than one multicast VLAN. However, IP multicast 

group addresses in different multicast VLANs cannot overlap.

Figure 105   Advanced Application > Multicast > Multicast Setting > MVR: Group 

Configuration

The following table describes the labels in this screen. 

Table 67   Advanced Application > Multicast > Multicast Setting > MVR: Group 
Configuration

Multicast 
VLAN ID

Select a multicast VLAN ID (that you configured in the MVR screen) from 
the drop-down list box.  

Name

Enter a descriptive name for identification purposes.   

Start 
Address

Enter the starting IP multicast address of the multicast group in dotted 
decimal notation. 

Refer to 

 for more information on IP multicast 

addresses. 

End Address Enter the ending IP multicast address of the multicast group in dotted 

decimal notation.

Enter the same IP address as the Start Address field if you want to 
configure only one IP address for a multicast group. 

Refer to 

 for more information on IP multicast 

addresses.