ZyXEL Communications 4728F User Manual
Chapter 26 IP Source Guard
XGS-4526/4528F/4728F User’s Guide
265
new static binding replaces the original one. To open this screen, click Advanced
Application > IP Source Guard > Static Binding.
Application > IP Source Guard > Static Binding.
Figure 118 IP Source Guard Static Binding
The following table describes the labels in this screen.
Table 78 IP Source Guard Static Binding
LABEL
DESCRIPTION
MAC Address
Enter the source MAC address in the binding.
IP Address
Enter the IP address assigned to the MAC address in the binding.
VLAN
Enter the source VLAN ID in the binding.
Port
Specify the port(s) in the binding. If this binding has one port,
select the first radio button and enter the port number in the field
to the right. If this binding applies to all ports, select Any.
select the first radio button and enter the port number in the field
to the right. If this binding applies to all ports, select Any.
Add
Click this to create the specified static binding or to update an
existing one.
existing one.
Cancel
Click this to reset the values above based on the last selected static
binding or, if not applicable, to clear the fields above.
binding or, if not applicable, to clear the fields above.
Clear
Click this to clear the fields above.
Index
This field displays a sequential number for each binding.
MAC Address
This field displays the source MAC address in the binding.
IP Address
This field displays the IP address assigned to the MAC address in
the binding.
the binding.
Lease
This field displays how long the binding is valid.
Type
This field displays how the Switch learned the binding.
static: This binding was learned from information provided
manually by an administrator.
manually by an administrator.
VLAN
This field displays the source VLAN ID in the binding.
Port
This field displays the port number in the binding. If this field is
blank, the binding applies to all ports.
blank, the binding applies to all ports.