ZyXEL Communications 4728F User Manual

Chapter 35 Policy Routing

XGS-4526/4528F/4728F User’s Guide

Click IP Application > Policy Routing in the navigation panel to display the 
screen as shown. Use this screen to configure a policy routing profile, which can 
consist of multiple policy routing rules.

Figure 156   IP Application > Policy Routing 

The following table describes the labels in this screen.  

Table 109   IP Application > Policy Routing

Active

This field allows you to activate/deactivate this policy routing profile and 
rules in the profile.

Profile Name

Enter a descriptive name (up to 32 printable ASCII characters) for 
identification purposes. Spaces are allowed.

Add

Click Add to insert a new policy routing profile to the Switch’s run-time 
memory. The Switch loses these changes if it is turned off or loses power, 
so use the Save link on the top navigation panel to save your changes to 
the non-volatile memory when you are done configuring.

Cancel

Click Cancel to begin configuring this screen afresh.

Clear Click 

Clear to set the above fields back to the factory defaults. 

Index

This field displays the index number of the policy routing profile. Click a 
number to edit the policy routing profile entry. 

Active

This field displays Yes when the policy routing profile is activated and No 
when it is deactivated.

Profile Name

This field displays the descriptive name for this profile. This is for 
identification purposes only.

Delete

Click Delete to remove the selected entry from the summary table.

Cancel

Click Cancel to clear the Delete check boxes.