Microsoft ES4649 User Manual
Command Line Interface
4-10
4
Command Groups
The system commands can be broken down into the functional groups shown below
.
Table 4-4 Command Group Index
Command Group
Description
Page
Line
Sets communication parameters for the serial port and Telnet,
including baud rate and console time-out
General
Basic commands for entering privileged access mode, restarting the
system, or quitting the CLI
System Management
Controls system logs, system passwords, user name, browser
management options, and a variety of other system information
Flash/File
Manages code image or switch configuration files
Authentication
Configures logon access using local or remote authentication;
also configures port security and IEEE 802.1X port access control
Access Control List
Provides filtering for IP frames (based on address, protocol, TCP/UDP
port number or TCP control code) or non-IP frames (based on MAC
address or Ethernet type)
SNMP
Activates authentication failure traps; configures community access
strings, and trap managers
DHCP
Configures DHCP client, relay and server functions
DNS
Configures DNS services.
Interface
Configures the connection parameters for all Ethernet ports,
aggregated links, and VLANs
Mirror Port
Mirrors data to another port for analysis without affecting the data
passing through or the performance of the monitored port
Rate Limiting
Controls the maximum rate for traffic transmitted or received on a port
Link Aggregation
Statically groups multiple ports into a single logical trunk; configures
Link Aggregation Control Protocol for port trunks
Address Table
Configures the address table for filtering specified addresses, displays
current entries, clears the table, or sets the aging time
Spanning Tree
Configures Spanning Tree settings for the switch
VLANs
Configures VLAN settings, and defines port membership for VLAN
groups; also enables or configures private VLANs and protocol VLANs
GVRP and
Bridge Extension
Configures GVRP settings that permit automatic VLAN learning;
shows the configuration for the bridge extension MIB
Priority
Sets port priority for untagged frames, selects strict priority or weighted
round robin, relative weight for each priority queue, also sets priority for
TCP/UDP traffic types, IP precedence, and DSCP
Quality of Service
Configures Differentiated Services
Multicast Filtering
Configures IGMP multicast filtering, query parameters, and specifies
ports attached to a multicast router
IP Interface
Configures IP address for the switch interfaces; also configures ARP
parameters and static entries
IP Routing
Configures static and dynamic unicast routing