Minicom Advanced Systems 5UM20114 User Manual
SMART CAT5 SWITCH 16 IP
.
19
The * sign inserts a pause with a definable duration. See page 25.
To require a confirmation request before keystrokes are sent, write confirm at the
start. E.g. confirm Ctrl+Alt+Delete.
start. E.g. confirm Ctrl+Alt+Delete.
For a list of key codes and aliases Smart 16 IP recognizes, refer to Appendix B on
page 80.
page 80.
Press Apply for the changes to take effect.
Home Page Refresh – Refreshes the Smart 16 IP Home page, so that direct
Smart IP Links updates their status.
Smart IP Links updates their status.
18. Telnet Console
The Telnet Console offers a Java applet for the Telnet protocol to open a
connection to Smart 16 IP. Its main use is the pass through option for the Serial
port 1 see page 38. The Telnet access has to be enabled in the security settings as
well, see page 44. It is also possible to connect with a standard Telnet client.
connection to Smart 16 IP. Its main use is the pass through option for the Serial
port 1 see page 38. The Telnet access has to be enabled in the security settings as
well, see page 44. It is also possible to connect with a standard Telnet client.
Access via Telnet
Connect via a standard Telnet client using Smart 16 IP’s Telnet server. Use it for
passthrough access to a device connected to serial port 1. Connect any serial
device, which offers terminal access via its serial port and access it using the
Telnet interface. Set the Serial settings - see page 37 - according to the
requirements of the device.
Connect via a standard Telnet client using Smart 16 IP’s Telnet server. Use it for
passthrough access to a device connected to serial port 1. Connect any serial
device, which offers terminal access via its serial port and access it using the
Telnet interface. Set the Serial settings - see page 37 - according to the
requirements of the device.
Connect to Smart 16 IP in the usual way required by the Telnet client, e.g. in a
UNIX shell:
UNIX shell:
telnet 192.168.1.22 – (The IP address has been replaced by the
one that is actually assigned to Smart 16 IP).
Type a username and password when prompted. These are identical to those of
the Web interface. The user management of the Telnet interface is controlled just
like the Web interface.
the Web interface. The user management of the Telnet interface is controlled just
like the Web interface.
Once logged in, the command line appears to type management commands.
The interface supports both the command line and terminal modes. The command
line mode is used to control or display some parameters. In terminal mode the
passthrough access to serial port 1 is activated (if the serial settings were made
accordingly). All inputs are redirected to the device on serial port 1 and the
answers appear on the Telnet interface.
line mode is used to control or display some parameters. In terminal mode the
passthrough access to serial port 1 is activated (if the serial settings were made
accordingly). All inputs are redirected to the device on serial port 1 and the
answers appear on the Telnet interface.
Telnet server commands
Click help to list the following commands:
Click help to list the following commands:
cls - Clears screen