Minicom Advanced Systems 5UM20114 User Manual
OPERATING GUIDE
.
30
Polarity - The polarity (positive/negative) of the synchronization signals. V
means vertical, H means horizontal.
means vertical, H means horizontal.
Description Give the mode a name. The name appears in the Remote Console
when the custom mode is activated.
when the custom mode is activated.
27. User/Group Management
From the Smart 16 IP Menu choose User/Group Management. The User/Group
Management settings appear. See Figure 21. The user and group management of
Smart 16 IP is based on configurable users and groups. Each user or group can
have different access capabilities.
Management settings appear. See Figure 21. The user and group management of
Smart 16 IP is based on configurable users and groups. Each user or group can
have different access capabilities.
The Smart 16 IP is factory set with a supervisor user called `super' with the
password ‘smart’. Change the super user password immediately after accessing
the Smart 16 IP.
password ‘smart’. Change the super user password immediately after accessing
the Smart 16 IP.
Figure 21 The User/Group Management settings
Existing user
Select an existing user for modification or deletion. Once selected, click
Select an existing user for modification or deletion. Once selected, click
to see the user information.
New user name
Enter a login name for a new user here. Ensure that it is not the same as an
existing user or group.
Enter a login name for a new user here. Ensure that it is not the same as an
existing user or group.
Full user name
Write the full name of the new user.
Write the full name of the new user.
Password / Confirm password
The password must be at least four characters. Confirm password.
The password must be at least four characters. Confirm password.