Minicom Advanced Systems 5UM20114 User Manual

 

Telnet port  
Port number at which Smart 16 IP's Telnet server is listening. If empty the default 
value is used. 

Bandwidth limitation 
The maximum network traffic generated through the Smart 16 IP Ethernet device. 

Disable Setup Protocol 
Exclude the Smart 16 IP from the setup protocol. 

Use the free Dynamic DNS service at www.dyndns.org. See Figure 24.  

Smart IP

Internet

Dynamic DNS server

www.dyndns.com

Administrator PC

DSL

Dynamic IP

NAT

DSL router

LAN

Server

 

Smart 16 IP is reachable via the IP address of the DSL router, which is 
dynamically assigned by the provider. Since the administrator doesn't know the IP 
address assigned by the provider, Smart 16 IP connects to a special dynamic DNS 
server in regular intervals and registers its IP address there. The administrator can 
contact this server as well and pick up the same IP address belonging to his card. 

The administrator has to register a Smart 16 IP that is supposed to take part in the 
service with the Dynamic DNS Server. He will get an approved nickname and 
password in return to the registration process. This account information is needed 
in order to determine the IP address of the registered Smart 16 IP.  

To enable the Dynamic DNS:  

1.  Ensure the Smart 16 IP LAN interface is properly configured.