Minicom Advanced Systems RJ-45 User Manual
USER GUIDE
Figure 18 Dynamic DNS Settings
3. Check the Enable Dynamic DNS box.
4. Change the settings as desired.
Dynamic DNS server - Enter the server name where IP Link registers itself in
regular intervals. If left blank the default will be used.
regular intervals. If left blank the default will be used.
Nickname - The nickname registered during manual registration with the Dynamic
DNS Server. Spaces are not allowed in the Nickname.
DNS Server. Spaces are not allowed in the Nickname.
Check time - IP Link registers itself in the Dynamic DNS server at this time.
Check interval - Interval for reporting again to the Dynamic DNS server by IP
Link.
Link.
IP Link has its own independent real time clock. Ensure the time setting is correct by
configuring a timeserver see page 24.
configuring a timeserver see page 24.
IP Link registers itself to the Dynamic DNS server slightly different from the time
configured. To reduce load peaks on the server we add a random time (0-10 min) to
the absolute time value.
configured. To reduce load peaks on the server we add a random time (0-10 min) to
the absolute time value.
5. Click
.
38. Serial Settings
From the IP Link Home page click
. The Serial Port window
appears. See Figure 19.
26