Minicom Advanced Systems 108/116 IP User Manual
Installation
Overview
14 | Smart 108/116 IP
2 Installation
2.1 Overview
Install the Smart 108/116 IP system as follows:
1. Remove the Smart 108/116 IP system from the package, and check that all
1. Remove the Smart 108/116 IP system from the package, and check that all
components are present and in good working condition.
2. Mount the Smart 108/116 IP unit in a rack.
3. Make all hardware connections between the power source, Smart 108/116 IP,
3. Make all hardware connections between the power source, Smart 108/116 IP,
services, network, and KVM console.
4. Power on the Smart 108/116 IP unit.
2.2 System Components
Before installing the Smart 108/116 IP system, verify that you have all the
components on the following list, as well as any other items required for installation.
components on the following list, as well as any other items required for installation.
The Smart 108/116 IP system consists of:
One Smart 108 IP (p/n 0SU70032) or one Smart 116 IP (p/n 0SU60005)
One RS232 Download cable (p/n 5CB40419)
ROCS - PS/2, USB (ordered separately)
CAT5 cables (1.5 m provided)
A rack mounting kit (p/n 5AC20247)
2.2.1
The Smart 108/116 IP Unit
The Smart 108/116 IP Unit front panel is illustrated in Figure 1.
Figure 1 – Smart 108/116 IP Unit Front Panel
The following table describes the functionality of the LEDS and buttons on the front
panel of the Smart 108/116 IP.
panel of the Smart 108/116 IP.