Minicom Advanced Systems 108/116 IP User Manual
In Manager IP Address, type the static IP address of the Centralized Management
Manager.
Manager.
Although not required, it is
if the Smart 108/116 IP
Centralized Management Manager
if the Smart 108/116 IP
Centralized Management Manager
3.4 Configuring Network SNMP Settings
You can activate SNMP logging
the Smart 108/116 IP to send monitoring events (such as log entries) to the SNMP
server. See Chapter 9 for a list of all recorded SNMP events.
the Smart 108/116 IP to send monitoring events (such as log entries) to the SNMP
server. See Chapter 9 for a list of all recorded SNMP events.
To enable and configure
1. From the configuration menu, select
The SNMP page opens.
2. Select the Enable Traps
and operation.
3. In Community, type the
4. In SNMP Manager IP, type the SNMP Server IP address.
3.5 Configuring User Settings
An Administrator can add, edit, remove
There are two levels of user access:
Administrator – has unrestricted access to all windows and settings, and can
change the name and password of all users
User – can access and
settings and power cycle
3.5.1
Adding a User
To add a User:
1. From the configuration menu, select
Configuring
Configuring Network SNMP Settings
, type the static IP address of the Centralized Management
Although not required, it is recommended to type the Manager IP Address
Smart 108/116 IP resides on the same network segment as the
Centralized Management Manager.
Configuring Network SNMP Settings
You can activate SNMP logging to provide support network monitoring. This will cause
to send monitoring events (such as log entries) to the SNMP
for a list of all recorded SNMP events.
for a list of all recorded SNMP events.
and configure SNMP logging:
From the configuration menu, select SNMP.
opens.
Figure 15 – SNMP Settings
Enable Traps
checkbox to enable SNMP traps of Smart 108/116 IP
type the name of the SNMP community.
, type the SNMP Server IP address.
ing User Settings
add, edit, remove, and block Users.
There are two levels of user access:
has unrestricted access to all windows and settings, and can
change the name and password of all users
and control target servers, but cannot use advanced mouse
settings and power cycle; cannot access the Web configuration interface
From the configuration menu, select Users.
Configuring the Network
Network SNMP Settings
User Guide |
29
, type the static IP address of the Centralized Management
Manager IP Address
even
as the
to provide support network monitoring. This will cause
to send monitoring events (such as log entries) to the SNMP
Smart 108/116 IP events
has unrestricted access to all windows and settings, and can
ervers, but cannot use advanced mouse
Web configuration interface