Minicom Advanced Systems 108/116 IP User Manual
Operating the Smart 108/116 IP Switching System Locally
Upgrading the Smart 108/116 IP Firmware
User Guide |
73
Complete Firmware Package – This includes the firmware for all Smart switches
and RICCS and ROCS.
Firmware Package for Smart Switch models – This includes the firmware for all
Smart switches.
Smart CAT5 Switch Firmware – There are multiple hardware versions of Smart
CAT5 Switch units, each with version specific firmware. On the Web page, find the
description and table that identifies your version.
description and table that identifies your version.
Firmware Package for RICC and ROC models – Download a firmware package for
RICC and ROC models (see the table on the Web page for the supported
RICC/ROC models). Or, search for and download the specific RICC/ROC models
with the correct firmware version.
RICC/ROC models). Or, search for and download the specific RICC/ROC models
with the correct firmware version.
6.3.2
Update Software System Requirements
The following are the Update software system requirements:
Pentium II class computer with 256 MB RAM and 10 MB free hard drive space
Free Serial port
Windows 2000 or later
6.3.3
Connecting the Smart 108/116 IP System
To update the firmware, the Smart 108/116 IP system must be connected and
switched on.
switched on.
6.3.4
Connecting the RS232 Download Cable
To run the Update software, you must connect the RS232 Download cable (p/n
5CB40419) to the computer containing the software, and to the Smart 108/116 IP
Switch Flash port.
5CB40419) to the computer containing the software, and to the Smart 108/116 IP
Switch Flash port.