Minicom Advanced Systems DX System User Manual
USER GUIDE
44
From the File menu choose Log off. The Login screen appears and the
Administrator can enter his password.
Administrator can enter his password.
Security On – When checked Users must login to access the AIM.
Security High – When checked Users must login every time they connect to a
server/device.
server/device.
Relate name – You can relate the name of each device to either the Server or Port.
When related to the Server, the device can be connected to any DX Central Server
port, without the need to reconfigure the port.
When related to the Server, the device can be connected to any DX Central Server
port, without the need to reconfigure the port.
When related to the Port, the DX system will only recognize the device when
connected to the original Server port it was connected to. Connecting to any other
DX Central Server port requires the new port to be configured.
connected to the original Server port it was connected to. Connecting to any other
DX Central Server port requires the new port to be configured.
Lock configuration – When checked, the system will only recognize the current
devices configured. Any changes in the devices physically connected will not be
recognized by the system.
devices configured. Any changes in the devices physically connected will not be
recognized by the system.
Note: Relate name and Lock configuration only work for XRICCs and not for
RICCs or Legacy switches.
RICCs or Legacy switches.
11.6.3 IP/Cascade Settings
Here the IP elements of the selected DX Central appear as configured in the initial
configuration wizard.
configuration wizard.
IP Address – A Static IP address in the usual dot notation.
Subnet mask –The net mask of the local network.
Default Gateway – Default Gateway address. Where the DX system is accessible
from networks other than the local one, this IP address must be set to the local
network router's IP address.
from networks other than the local one, this IP address must be set to the local
network router's IP address.
SNMP Manager - SNMP - Simple Network Management Protocol is used to
collect information and configure network devices on IP networks. Type the IP
address of the SNMP Manager to send log traps of the DX system.
collect information and configure network devices on IP networks. Type the IP
address of the SNMP Manager to send log traps of the DX system.
Send Log Trap check box – When checked SNMP log traps are sent to the SNMP
Manager. The log traps are sent as soon as an event occurs. You can choose the
events to be sent in the View/Activity Log window, see page 63.
Manager. The log traps are sent as soon as an event occurs. You can choose the
events to be sent in the View/Activity Log window, see page 63.
Configure cascade options –When you add or remove a cascaded DX Central you
must reconfigure the cascade status of the DX system. This is done using the
Configuration wizard as described on page 20. To display the Configuration
wizard, click
must reconfigure the cascade status of the DX system. This is done using the
Configuration wizard as described on page 20. To display the Configuration
wizard, click
.