Minicom Advanced Systems 216 User Manual
USER GUIDE
28
22.5 Tuning – F5
You can tune the image of any computer screen from the Main window.
To adjust the screen image:
1. Navigate to the computer line you wish to adjust.
2. Press F5. The screen image of the selected computer appears, together with the
Image Tuning label, see Figure 30.
Figure 30 Image Tuning label
3. Adjust the image by using the Right and Left Arrow keys.
4. When the image is satisfactory, press Esc.
Note! Picture quality is relative to distance. The further away a computer is from
the Smart 216, the lower the image quality, and the more tuning needed. So place
the higher resolution computers closer to the Switch.
the Smart 216, the lower the image quality, and the more tuning needed. So place
the higher resolution computers closer to the Switch.
22.6 The Settings window - F2
Press F2. The Settings window appears see Figure 31.
Figure 31 Settings window
In the Settings window navigate downwards using the Tab key. At the bottom of
the window, press Tab to go to the top of the window. Change settings by typing in
the selected area or by pressing the spacebar – whichever is relevant.
the window, press Tab to go to the top of the window. Change settings by typing in
the selected area or by pressing the spacebar – whichever is relevant.
[Changing the network parameters from the OSD is explained with the initial
configuration on page 11].
configuration on page 11].