Minicom Advanced Systems DX User IP User Manual
DX USER IP
19
To require a confirmation request before keystrokes are sent, write confirm at the
start. E.g. confirm Ctrl+Alt+Delete.
start. E.g. confirm Ctrl+Alt+Delete.
For a list of key codes and aliases DX User IP recognizes, refer to Appendix B on
page 63.
page 63.
Press Apply for the changes to take effect.
Home Page Refresh – Refreshes the DX User IP Home page, so that direct Smart
IP Links updates their status.
IP Links updates their status.
22. Telnet Console
The Telnet Console offers a Java applet for the Telnet protocol to open a connection
to DX User IP. Its main use is the pass through option for the Serial port 1 explained
on page 38. The Telnet access has to be enabled in the security settings as well, see
page 44. It is also possible to connect with a standard Telnet client.
to DX User IP. Its main use is the pass through option for the Serial port 1 explained
on page 38. The Telnet access has to be enabled in the security settings as well, see
page 44. It is also possible to connect with a standard Telnet client.
Access via Telnet
Connect via a standard Telnet client using DX User IP’s Telnet server. Use it for
passthrough access to a device connected to Serial port 1. Connect any serial device,
which offers terminal access via its Serial port and access it using the Telnet
interface. Set the Serial port settings according to the requirements of the device –
explained on page 39.
Connect via a standard Telnet client using DX User IP’s Telnet server. Use it for
passthrough access to a device connected to Serial port 1. Connect any serial device,
which offers terminal access via its Serial port and access it using the Telnet
interface. Set the Serial port settings according to the requirements of the device –
explained on page 39.
Connect to DX User IP in the usual way required by the Telnet client, e.g. in a
UNIX shell:
UNIX shell:
telnet 192.168.1.22 – (The IP address has been replaced by the one
that is actually assigned to DX User IP).
Type a username and password when prompted. These are identical to those of the
Web interface. The user management of the Telnet interface is controlled just like
the Web interface.
Web interface. The user management of the Telnet interface is controlled just like
the Web interface.
Once logged in, the command line appears to type management commands.
The interface supports both the command line and terminal modes. The command
line mode is used to control or display some parameters. In terminal mode the
passthrough access to serial port 1 is activated (if the serial settings were made
accordingly). All inputs are redirected to the device on serial port 1 and the answers
appear on the Telnet interface.
line mode is used to control or display some parameters. In terminal mode the
passthrough access to serial port 1 is activated (if the serial settings were made
accordingly). All inputs are redirected to the device on serial port 1 and the answers
appear on the Telnet interface.
Telnet server commands
Click help to list the following commands:
Click help to list the following commands:
cls - Clears screen