Motorola P880 User Manual

1 - 4

Cajun P880 Routing Switch Installation Guide

The following items are required for installing the Cajun P880:

■

ESD grounding strap and an antistatic mat

■

Screws and nuts (#10-32 recommended depending on the 
type of rack used)

■

Phillips head screwdrivers (type 1 tip)

■

Tape measure and a level (to check for squareness of rack and 
mounting shelf)

The process for installing the system requires the following tasks:

1. Preventing Electrostatic Discharge

2. Installing the Mounting Shelf

3. Installing the Chassis

4. Installing the Power Supply

5. Connecting the Power Supplies

6. Installing the Modules

7. Installing the Cables

8. Installing the Cable Management Bracket

9. Powering On the System

10. Replacing Fan Assemblies

Protect the modules against damage from electrostatic discharge 
(ESD) by using a grounded ESD wrist strap while installing and 
removing modules. While installing the P880 Cajun Switch:

1. Ground the unit. The unit is grounded through the power cord 

when it is connected between the unit and the primary power 
source.