Motorola P880 User Manual
Cajun P880 Routing Switch Installation Guide
1 - 23
Powering On the System
To power on the system:
1. Check all connections.
2. Turn on the power supplies by pushing the ON (—) switch for
each supply. (ON is indicated by “—” and OFF is indicated by
“O”.)
“O”.)
Power-On Sequence
As the system powers on:
■
Cajun v4.1.x
(or later version) displays on the 8-character
LED display on the front panel of the switch.
■
On properly functioning modules, Port LEDs will cycle from
yellow to normal operating status as the system continues
through its power-on diagnostics.
yellow to normal operating status as the system continues
through its power-on diagnostics.
When the system has completed running its internal diagnostics, the
8-character LED display should read:
8-character LED display should read:
Cajun v4.1.x
(or later version)
The LEDs should function as described in "Interpreting Front Panel
LED Displays" in the Cajun P550/P220 Switch Operation Guide. In
general, you will observe the following on properly functioning
modules (Table6):
LED Displays" in the Cajun P550/P220 Switch Operation Guide. In
general, you will observe the following on properly functioning
modules (Table6):
Table 6. Power-up LED Function
Module
LED
Normal Behavior
All Modules
Module
Status
Status
Solid green, indicating normal
operation.
operation.
Gigabit
Modules
Modules
TX and RX
Solid green, flashing yellow
intermittently to indicate traffic.
intermittently to indicate traffic.
Port
Solid green, indicating link integrity.
HD/FD
Solid green, indicating full-duplex
operation.
operation.
10/100
Modules
Modules
Port
Solid green, flashing yellow
intermittently to indicate traffic.
intermittently to indicate traffic.