Motorola P880 User Manual

2 - 24

Cajun P880 Routing Switch Installation Guide

8. Use Table15 to configure your switch VTP Snooping parameters.

9. Click APPLY to save your changes, or CANCEL to restore 

previous settings.

To configure Non-VLAN switch port parameters:

1. In the Switch Port Configuration dialog box, from the Allow 

Learning pull-down menu, select Disable to stop the port’s 
learning of new addresses. This feature can be useful for security. 
Selecting Enable allows the port to learn new addresses.

For example, you can set this parameter to Disable, then add a 
static MAC address entry for this port. 

2. From the Hunt Group pull-down menu, select a hunt group 

for which this port will be a member. Refer to “Using Hunt 
Groups to Aggregate Bandwidth between Switches”, in 

the Cajun 

, for more information on hunt 

groups.

Select to enable or disable the VTP snooping 
protocol globally for the switch. The default value 
is Disabled.

Enter the name associated with the Cisco VTP 
domain. The default is Null.

The domain name is automatically 

learned within approximately five 
minutes from a Cisco VTP switch provided 
both the Domain Name is Null and the 
VTP Snooping State is enabled on the 
Cajun switch. 

Displays the VTP snooping configuration revision 
number associated with the last successful VTP 
configuration update on the Cajun switch. 

Displays the IP address of the Cisco switch that 
initiated the configuration update. 

Displays the date and time that the Cisco switch 
initiated the configuration update.