Motorola P880 User Manual

Cajun P880 Routing Switch Installation Guide 

2 - 27

To enable Fast Start for ports on a module associated with a selected 
bridge:

1. In the System Configuration section of the Web Agent 

window, click 

Modules & Ports. The Module Information 

dialog box opens.

2. In the Switch Ports column, click on the switch port number 

listed for the selected module. The Switch Ports dialog box 
opens.

3. To set Fast Start mode on individual ports, in the Name column, 

click 

the port name for the selected module. The Switch 

Port Configuration dialog box opens.

Or

To set Fast Start mode on all ports in a module, click 

Switch Port Configuration. The Switch Port Configuration on 
All Ports dialog box opens.

4. From the Fast Start pull-down menu, select Enable to enable 

Fast Start mode on the selected module ports.

5. Click APPLY to save your changes, or CANCEL to clear your 

selection.

The All Ports Configuration dialog box allows you to apply the same 
parameter settings to all switch ports in a module using a single 
command. 

To set all switch ports in a module using a single command:

1. In the System Configuration section of the Web Agent 

window, select 

Modules & Ports. The Module Information 

dialog box opens.

2. In the Ports column, click the number of ports listed for the 

module you want to configure (for example, 

10 for 100BASE-

FX). The Physical Port Configuration dialog box opens.

3. Click All Module Ports Configuration at the bottom of the 

dialog box. The All Ports Configuration dialog box opens.

4. Select the port on which you want your changes to occur.