Motorola P880 User Manual

2 - 30

Cajun P880 Routing Switch Installation Guide

You can use the Web Agent to change the communications settings 
for the serial port connection on the front panel of the Layer 3 
supervisor module. 

Initially, the switch’s console port is configured as a TTY Console to 
support a TTY connection. The Layer 2 and Layer 3 supervisor 
modules allow you to reconfigure the console serial port as a PPP 
Console to support a dial-in PPP connection using a modem.

* Note:  As a PPP console, you can change only the switch’s baud 

rate and flow control parameters. The flow control 
parameters are limited to None or Xon/Xoff.

To configure the console serial port as a TTY Console:

1. In the System Configuration section of the Web Agent 

window, select 

Console Configuration. The Console 

Configuration dialog box opens.

2. Click TTY for your console type and click SELECT. The Console 

Port Configuration dialog box opens.

3. Use Table22 to set your console serial port settings:

4. Click APPLY to save your changes, or CANCEL to restore 

previous settings.

9600

300, 1200, 2400, 4800, 9600, 19200, 
38400, 57600, 115200

Xon/Xoff 
(TTY)

None, Xon/Xoff (TTY)

8

7 or 8

None

Odd, Even, or None

1

1 or 2