Motorola P880 User Manual

2 - 36

Cajun P880 Routing Switch Installation Guide

7. In the Mask field, enter the network mask IP address (for 

example, 255.255.255.0).

8. Click APPLY to save your changes, or CANCEL to restore 

previous settings.

To configure a PPP Console static route:

1. Configure your console serial port as a PPP Console. Refer to 

2. From the IP Configuration section of the Web Agent window, 

click 

Static Routes. The IP Static Routes dialog box opens.

3. Click CREATE. The Add IP Static Routes dialog box opens. This 

allows you to define a static route for the PPP console.

4. In the Network Address field, enter the IP address to be 

associated with the PPP console port.

5. In the Mask field, enter the network mask IP address.

6. In the Next-Hop Address field, enter the IP address of the 

gateway associated with this static route.

7. Click APPLY to save your changes, or CANCEL to restore 

previous settings.

To configure your switch as an IP/IPX or AppleTalk router, you must 
first configure your Cajun switch with the following hardware:

■

P880 supervisor module (mandatory)

■

Layer 3 media modules (optional) including:

2-Port Gigabit Ethernet module

10-Port 100-BASE-F module

12-Port 10/100-BASE-T module