Cable Electronics SW404HD User Manual

Step 2: First select the Output number keys 02, 03 and 05 to the right, and select the 

Input number key 01 to the bottom. 

Then, consecutively press the previously selected Output number keys 02, 03 and 

05 (or press the Deselect all output key). This selects Input 01 to be routed to 

Outputs 02, 03, and 05. 

Step 3: First select the Output number key 06 to the right, and select the Input number 

key 03 to the bottom.  

Then, press the previously selected Output number key 06 (or press the Deselect 

all output key). This selects Input 03 to be routed to Output 06. 

 

Example 2 (Video Only Switching):: Using a SW808HD matrix having all the 

input/output ports properly connected to the equipment.  To set the input/output 
connectors to switching from video channel 1 to output channels number 1, 6 and 7 and also 
to switch from audio channel 2 to output channel 8. There are two ways of operations:  

 

First method:  In the lower right corner of the blue area, enable the Video and 

disable the Audio functions (check/uncheck the white boxes).  To complete the 

switching operation, click on the corresponding 

 icons corresponding directly 

to the INPUT number key 01 and the OUTPUT number keys 01, 06, and 07 on the 

matrix to turn them into 

. 

 

The following 4 steps, completes the operation of switching video channel 1 to output 

channels 1, 6, and 7 while also switching audio channel 2 to output channel 8. 

Step 1: In the lower right corner of the blue area, enable the Video and disable 

the Audio functions (check/uncheck the white boxes). 

Step 2: Select the output number keys 01,06 and 07 to the right and select the input 

number key 01 to the bottom.  

Then, press the previously pressed output number keys 01, 06, and 07 to the right 

(or press the Deselect all output key). This selects video switching of input 01 to 

output 01,06 and 07. 

Step 3: In the lower right corner of the blue area, disable the Video and enable 

the Audio functions (uncheck/check the white boxes). 

Step 4: Select output number key 08 to the right and input number key 02 to the 

bottom.  Then, press again the previously pressed output number key to the right 

(or press the Deselect all output key). This selects audio switching of input 02 to 

output 08.