Motorola P120 User Manual
Chapter 7
Cajun Campus CLI (Command Line Interface)
72
Cajun P120 User’s Guide
User Level Commands
Password Commands
Set Password Command
Use the
set password
command to change the login password on the CLI. The
command prompts you to enter the old password. If the password is valid, you are
prompted to enter a new password and to verify the new password.
prompted to enter a new password and to verify the new password.
The syntax for this command is:
set password
Example:
Console>(enable) set password
Enter old password: <old_password>
Enter new password: <new_password>
Retype new password: <new_password>
Console>(enable)
Set Enablepass Command
Use the
set enablepass
command to change the password for the Privileged
level of the CLI. The command prompts you to enter the old password. If the
password is valid, you are prompted to enter a new password and to verify the new
password.
password is valid, you are prompted to enter a new password and to verify the new
password.
The syntax for this command is:
set enablepass
Example:
Console>(enable) set enablepass
Enter old password: <old_password>
Enter new password: <new_password>
Retype new password: <new_password>
Console>(enable)
Note: You can change the User, Privileged or Technician Level passwords from any
level.
level.