Multi-Tech Systems MVPGSM-2 User Manual

Chapter 4: Configuring your MVPGSM 

Multi-Tech Systems, Inc. 

MVPGSM 

50 

Saving the MultiVOIP GSM Configuration.  When values have been set for all of the various operating 
parameters, click on Save Setup in the sidebar, then Save & Reboot. 

Creating a User Default Configuration.  When a “Setup” (complete grouping of parameters) is being 
saved, you will be prompted about designating that setup as a “User Default” setup.  A User Default 
setup may be useful as a baseline of site-specific values to which you can easily revert.  Establishing a 
User Default Setup is optional. 

 

This is also accessible from the Start menu in the MultiVOIP GSM software folder. 

Set Baud Rate.  The Connection option in the sidebar menu has a “Settings” item that includes the baud-
rate setting for the COM port of the computer running the MultiVOIP GSM software. 

First, it is important to note that the default COM port established by the MultiVOIP GSM program is 
COM1.  Do not accept the default value until you have checked the COM port allocation on your PC.  To 
do this, check for COM port assignments in the system resource manager of your Windows operating 
system. If COM1 is not available, you must change the COM port setting to a COM port that you have 
confirmed as being available on your PC.