Motorola WS5100 User Manual

3-25

 

3. Refer to the 

field to enable and define the configuration for automatic cluster 

file updates. 

4. Refer to the 

 field to enable and define the configuration for automatic firmware updates. If 

enabled, the located (updated) switch firmware will be used with the switch the next time the switch 
boots

5. Click the 

 button to save the changes to the configuration.

6. Click the 

button to revert back to the last saved configuration.

Provide the complete and accurate path to the location of the configuration files on the 
server. This path must be accurate to ensure the most recent file is retrieved.

Use the 

drop-down menu to specify the 

 

or resident 

switch

 medium used for the file update from the server. FLASH is the default 

setting.

Enter the password required to access the server.

Select the 

checkbox to allow an automatic cluster file update when a new (updated) 

file is detected (upon the boot of the switch) at the specified IP address.

Define the 

 of the server where the cluster files reside. If a new version is 

detected when the switch is booted it will be uploaded to the switch and used upon the next 
boot of the switch.

Enter the 

 required to access the FTP or TFTP server.

Provide the complete and accurate path to the location of the cluster files on the server. This 
path must be accurate to ensure the most recent file is retrieved.

Use the 

drop-down menu to specify the 

 

or resident 

switch

 medium used for the file update from the server. FLASH is the default 

setting.

Enter the password required to access the server.

Select the 

 checkbox to allow an automatic firmware update when a new (updated) 

version is detected (upon the boot of the switch) at the specified IP address.

Define the 

 of the server where the firmware files reside. If a new version is 

detected when the switch is booted it will be uploaded to the switch and used upon the next 
boot of the switch.

Enter the 

 required to access the FTP or TFTP server.

Provide the complete and accurate path to the location of the firmware files on the server. 
This path must be accurate to ensure the file is retrieved.

Use the 

drop-down menu to specify the 

 

or resident 

switch

 medium used for the file update from the server. FLASH is the default 

setting.

Enter the password required to access the server.

Provide the target firmware version to ensure the switch is upgrading to the intended 
baseline.