Motorola WS5100 User Manual

4-13

 

The following configuration details display in the table:

3. Select a record from the table and click the 

 button to modify the record. For more information, see 

.

4. Select a record from the table and click the 

 button to remove the configuration from the list of 

switch virtual interfaces.

5. Click the 

 button to add a new configuration to the switch virtual interface. For more information, see 

Displays the name of the virtual interface.

Displays the VLAN ID associated with the interface.

Displays whether the DHCP client is enabled or not. A green check mark defines the DHCP 
client as enabled for the interface. A red X means the interface is disabled.

Displays the IP address for the virtual interface.

Displays the subnet mask assigned for this interface.

Displays whether the selected Switch Virtual Interface is currently invoked on the switch 
(Up) or not (Down).

A green checkmark within this column defines this VLAN as the one currently used by the 
switch management interface. This designates the interface settings used for global switch 
settings in case of any conflicts. For example, if multiple SVIs are configured with DHCP 
enabled on each, the switch could have multiple domain names assigned from the different 
DHCP servers. This setting does not affect any of the Management Access Interfaces 
configured using 

.