Alloy Computer Products GSS-8T16SFP User Manual

 

52

The switch can be rebooted or factory defaulted via the following methods. 
 
Click Reboot System menu to reboot the switch. 

 

 
Click Reset System menu to reset    the switch to its factory default settings. 

 

 
¾

  Reboot System –Reboot the system. All configuration settings will be retained. If you want to 

keep all your configurations then select this option. 

¾

  Reset System – Reset all configurations (including the username, password and IP address; only 

the MAC address will not be changed) to default settings before rebooting the system. Means 
that any customized configurations will be lost and can not be recovered. 

 
The GSS-24T2SFP web smart switch also provides an alternative to Reset System by using the Reset 
button on the rear panel: 
¾

  While the system is running (the DIAG LED indicator is ON), pressing and holding the Reset 

button (over 5 seconds) until the DIAG LED indicator begins flashing, at any time will 
activate the Write Default procedure.   

 
After this procedure is completed, the switch will be rebooted and initialized using the default settings 
automatically. 
 
The GSS-24T2SFP switch takes approximatly10 seconds to reboot. You need to login the system 
again to enter the web management configuration.