Alcatel Carrier Internetworking Solutions 6800 User Manual

Troubleshooting Group Mobility

6800 Group Mobility Troubleshooting

OmniSwitch Troubleshooting Guide

page 9-7

The following commands and debugging functions are available for troubleshooting Group Mobility on 
the NI. A summary is shown below.

SW_2T19-> show vlan rules                         

Legend: type: * = binding rule

   type            vlan    rule
-----------------+------+-------------------------------------------------------
  ip-net              9    166.24.9.0, 255.255.255.0
  ip-net            104    166.24.104.0, 255.255.248.0
  ip-net            112    166.24.112.0, 255.255.248.0
  dhcp-port         104    1/1
  dhcp-port         104    1/2
  dhcp-port         104    1/3
  dhcp-port         104    1/4

Working: [Kernel]->gmHelp

***************************************************
              Group Mobility Help for CMM            
***************************************************
'gmcKiteDebug = 1' must be done in order to see the outputs on below debug 
commands.
It also enables the real time debugger. To disable 'gmcKiteDebug = 0'.

gmcShowPorts ---------------Displays all the ports in the system
gmcShowMipTables -----------Displays all MIP tables used
gmcShowRules (GmcRuleType) -Displays all rules of specified type
gmcShowPiMap ---------------Displays Protocol Indicator Map 
gmcShowConnections ---------Displays connections with all CMM interfaces
gmcShowNiConnections -------Displays connections with all NI interfaces
gmcMacVlanShowBuffer (int type) - If type=0, display macvlan_sw malloc counter only
                                - If type=1, display above and macvlan_sw table
gmcDebugKiteShowCML (int slot) -- Display CML setting at CMM