Alcatel Carrier Internetworking Solutions 6800 User Manual

Page of 614
Troubleshooting QoS
Troubleshooting QoS
page 10-14
OmniSwitch Troubleshooting Guide
September 2005
QVID
Egress VLAN ID. A value appears in this field if the packet is being 
routed to the destination IP address, which is the address that appears in 
the IP field.
EGR0
The egress slot/port on ASIC 0. The port that will forward a routed 
packet to the destination IP address, which is the address that appears in 
the IP field. EGR0 must be equal to EGR1. A -1 in this field indicates 
that packets cannot be routed to the IP on this slot.
EGR1
The egress slot/port on ASIC 1. The port that will forward a routed 
packet to the destination IP address, which is the address that appears in 
the IP field. EGR0 must be equal to EGR1. A -1 in this field indicates 
that packets cannot be routed to the IP on this slot.
IR
Ignore routing. Packets to this IP are switched and not routed on this 
ASIC. The value of this field is usually 1 on all ASICs, except the 
ASIC where the address resides. A value of on all ASICs may indi-
cate that the ARP for the IP address is not yet available. 
TG
Tagged, if set the QVID value on the egress routed packet, if the 
egress port (as indicated by EGR0 EGR1) is tagged. 
BC
If 1 this is an IP broadcast packet, and packets to this destination IP are 
flooded out on the ports of the egress VLAN. 
subnet
The IP subnet.
NSR
Always 255.
output definitions (continued)