Alcatel Carrier Internetworking Solutions 6800 User Manual

Troubleshooting 802.1X

Troubleshooting with the CLI

OmniSwitch Troubleshooting Guide

page 19-3

Authentication      : enabled,
IP Router Port      : none,
IPX Router Port     : none,

6 Verify the status of the 802.1x port using the show 802.1x command. Read the OmniSwitch CLI Refer-
ence Guide to understand the explanation for each field.

Layer-2: show 802.1x 2/3   
802.1x slot/port = 2/3

authenticator PAE state     = AUTHENTICATED,

  backend authenticator state = IDLE,
  direction                   = both,
  operational directions      = both,
  port-control                = auto,
  port status                 = Authorized,
  quiet-period (seconds)      = 60,
  tx-period (seconds)         = 30,
  supp-timeout (seconds)      = 30,
  server-timeout (seconds)    = 30,
  max-req                     = 2,
  re-authperiod (seconds)     = 3600,
  reauthentication            = no

7 Check for the 802.1x port statistics. Read the OmniSwitch CLI Reference Guide to understand the 
detail of each field.

Layer-2: show 802.1x statistic 2/3

802.1x slot/port = 2/3
  EAPOL frames received            = 28,
  EAPOL frames transmitted         = 38,
  EAPOL start frames received      = 8,
  EAPOL logoff frames received     = 0,
  EAP Resp/Id frames received      = 10,
  EAP Response frames received     = 10,
  EAP Req/Id frames transmitted    = 13,
  EAP Req frames transmitted       = 10,
  Invalid EAPOL frames received    = 0,
  EAP length error frames received = 0,
  Last EAPOL frame version         = 1,

Last EAPOL frame source           = 00:0f:1f:d5:54:95