Alcatel Carrier Internetworking Solutions omniswitch User Manual
Using WebView
WebView CLI Commands
OmniSwitch 6600 Family Switch Management Guide
March 2005
page 9-3
WebView CLI Commands
The following configuration options can be performed using the CLI. These configuration options are also
available in WebView.
available in WebView.
Enabling/Disabling WebView
WebView is enabled on the switch by default. If necessary, use the
command to enable
WebView. For example:
-> http server
Use the no http server command to disable WebView on the switch. If web management is disabled, you
will not be able to access the switch using WebView. Use the
will not be able to access the switch using WebView. Use the
command to view WebView
status.
Enabling/Disabling SSL
Force SSL is disabled by default. Use the
ple:
-> http ssl
Use the no http ssl command to disable Force SSL on the switch. Use the show http command to view
WebView status.
WebView status.