Alcatel Carrier Internetworking Solutions omniswitch User Manual
Using SNMP
Verifying the SNMP Configuration
OmniSwitch 6600 Family Switch Management Guide
March 2005
page 10-39
Verifying the SNMP Configuration
To display information about SNMP management stations, trap management, community strings, and
security, use the show commands listed in the following table.
security, use the show commands listed in the following table.
For more information about the resulting displays from these commands, see the OmniSwitch CLI Refer-
ence Guide.
ence Guide.
Displays current SNMP station information including IP address, UDP
Port number, Enabled/Disabled status, SNMP version and user account
names.
Port number, Enabled/Disabled status, SNMP version and user account
names.
Shows the local community strings database including status, commu-
nity string text and user account name.
nity string text and user account name.
Displays current SNMP security status.
Displays SNMP statistics. Each MIB object is listed along with its
status.
status.
Displays SNMP MIB information. Information includes MIP ID num-
ber, MIB table name, and command family.
ber, MIB table name, and command family.
Displays SNMP trap replay information. This includes the IP address of
the SNMP station manager that replayed each trap and the number of
the oldest replayed trap.
the SNMP station manager that replayed each trap and the number of
the oldest replayed trap.
Displays the current SNMP trap filter status. This includes the IP
address of the SNMP station that recorded the traps and the identifica-
tion list for the traps being filtered.
address of the SNMP station that recorded the traps and the identifica-
tion list for the traps being filtered.
Displays the current authentication failure trap forwarding status (i.e.,
enable or disable).
enable or disable).
Displays SNMP trap information including trap ID numbers, trap
names, command families and absorption rate. This command also dis-
plays the Enabled/Disabled status of SNMP absorption and the Traps to
WebView service.
names, command families and absorption rate. This command also dis-
plays the Enabled/Disabled status of SNMP absorption and the Traps to
WebView service.