Alcatel Carrier Internetworking Solutions 6600 User Manual
Configuring High Availability VLANs
Release 5.1.6.R02 User Guide Supplement
June 2005
page 3-3
Quick Steps for Creating High Availability VLANs
Follow the steps below for a quick tutorial on configuring high availability (HA) VLANs. Additional
information on how to configure each command is given in the sections that follow.
information on how to configure each command is given in the sections that follow.
1 Create a default VLAN for the HA VLAN ports with the
vlan
command as shown below:
-> vlan 10
2 Assign ports to the new default VLAN with the
vlan port default
command as shown below:
-> vlan 10 port default 1/1, 3/2, 3/7, 6/1, 6/2
3 Create a VLAN that will become the HA VLAN once configured with ingress and egress ports. For
example:
example:
-> vlan 200
4 Configure ports 1/1 and 3/2 as ingress ports for HA VLAN 200. Use the
vlan port-mac ingress-port
command as shown below:
-> vlan 200 port-mac ingress-port 1/1 3/2
5 Configure ports 6/1 and 6/2 as egress ports for HA VLAN 200. Use the
vlan port-mac egress-port
command as shown below:
-> vlan 200 port-mac egress-port 6/1 6/2
6 Assign a MAC address to this high availability VLAN with the
mac-address-table port-mac vlan
mac
command. For example:
-> mac-address-table port-mac vlan 200 mac 00:DA:29:3C:11:20
7 Configure port 3/7 as an inter-switch port for the HA VLAN with the
vlan 802.1q
command as shown
below:
-> vlan 200 802.1q 3/7
Note that Step 7 is only done when the HA VLAN is configured across two switches. The ports that
provide the connection between the two switches must be tagged with the HA VLAN ID.
provide the connection between the two switches must be tagged with the HA VLAN ID.
8 Set the HA VLAN ingress flood queue bandwidth size to 100 Mbps. Use the
-> vlan 200 port-mac bandwidth 100