Alcatel Carrier Internetworking Solutions 6600 User Manual

show 802.1x non-supp

User Documentation Addendum

page 1-16

Release 5.1.6.R02 User Guide Supplement

The following example command configures a BGP peering session using a Loopback0 IP interface 
address:

-> ip bgp neighbor 2.2.2.2 update-source Loopback0

See the OmniSwitch 7700/7800/8800 Network Configuration Guide for more information about configur-
ing an IP Loopback0 interface.

The following modifications should be made:

On page 21-3 the following two new steps should be added to this section:

6 (Optional) Configure a guest VLAN for the 802.1x port using the 

-> 802.1x 3/1 guest-vlan 5

7 (Optional) Configure the number of times supplicant devices are polled for identification using the 

-> 802.1x 3/1 supp-polling retry 10

On page 22-3 of this section replace the Note information about how to display 802.1x configuration and 
user information with the following:

Note. Verify the 802.1X port configuration using the 

 command:

-> show 802.1x 1/13

802.1x configuration for slot 1 port 13:

direction                   = both,

operational directions      = both,

port-control                = auto,

quiet-period (seconds)      = 60,

  tx-period (seconds)         = 30,

  supp-timeout (seconds)      = 30,

  server-timeout (seconds)    = 30,

  max-req                     = 2,

  re-authperiod (seconds)     = 3600,

  reauthentication            = no

Guest Vlan ID 

= 20,

  Supplicant polling retry count = 2 

Optional. To display the number of 802.1x users on the switch, use the 

 command: