Alcatel Carrier Internetworking Solutions 6600 User Manual
User Documentation Addendum
vlan port-mac bandwidth
Release 5.1.6.R02 User Guide Supplement
June 2005
page 1-3
vlan port-mac bandwidth
Configures the bandwidth for the ingress flood queue associated with high availability (HA) VLANs.
vlan vid port-mac bandwidth mbps
Syntax Definitions
vid
An existing HA VLAN ID number (1–4094).
mbps
Bandwidth value for the specified HA VLAN flood queue (1mbps –
1000mbps).
1000mbps).
Defaults
By default, the flood queue bandwidth for an HA VLAN is set to 15 mbps.
Platforms Supported
OmniSwitch 7700, 7800, 8800
Usage Guidelines
• The VLAN ID specified with this command must be the ID for an HA VLAN. An HA VLAN contains
at least one ingress or egress port and one MAC address.
• The ingress flood queue is created when the first HA VLAN is configured on the switch, and deleted
when the last HA VLAN is removed from the switch.
Examples
-> vlan 10 port-mac bandwidth 50
-> vlan 200 port-mac bandwidth 1000
Release History
Release 5.1.6; command was introduced.
Related Commands
MIB Objects
vlanTable
vlanNumber
vlanHABandwidth
vlan port-mac ingress-port
Adds and removes ingress ports from an HA VLAN.
vlan port-mac egress-port
Adds and removes egress ports from an HA VLAN.
mac-address-table port-mac
vlan mac
Adds and removes MAC addresses from an HA VLAN.