Allied Telesis X610-24TS User Manual

Chapter 3: Installing the Hardware

74

Please review the following safety precautions before you begin to install 
the switches or any of their components.

The  indicates that a translation of the safety statement is 
available in a PDF document “Translated Safety Statements” posted 
on the Allied Telesis website at www.alliedtelesis.com.

Warning: Class 1 Laser product. 



 L1

Warning: Do not stare into the laser beam. 



 L2

Warning: To prevent electric shock, do not remove the cover. No 
user-serviceable parts inside. This unit contains hazardous 
voltages and should only be opened by a trained and qualified 
technician. To avoid the possibility of electric shock, disconnect 
electric power to the product before connecting or disconnecting 
the LAN cables. 



 E1

Warning: Do not work on equipment or cables during periods of 
lightning activity. 



 E2

Warning: Power cord is used as a disconnection device. To de-
energize equipment, disconnect the power cord. 



 E3

Warning: Class I Equipment. This equipment must be earthed. 
The power plug must be connected to a properly wired earth 
ground socket outlet. An improperly wired socket outlet could 
place hazardous voltages on accessible metal parts. 



 E4

Pluggable Equipment. The socket outlet shall be installed near 
the equipment and shall be easily accessible. 



 E5

Caution: Air vents must not be blocked and must have free 
access to the room ambient air for cooling. 



 E6

Warning: Operating Temperature. This product is designed for a 
maximum ambient temperature of 40° degrees C. 



 E7